DEWALT DWE7491RS Vs Bosch 4100 XC-10/ – Comparison
In this article, DEWALT DWE7491RS Vs Bosch 4100 XC-10/ – Comparison I will compare both these tools that will help you in choosing the right tool for the right hand task!
DEWALT DWE7491RS Vs Bosch 4100 XC-10/ Compare Which One Is The Best Table Saw? Here! We’ll discuss similarities as well as differences between these two saws.
Both these tools are prominent and have vitality. They even have lots of the same features but how they differ from one another, we will compare them side by side for your convenience. I will explain the similarities as well as differences of each one in detail that will help you in hand picking the right one!
It is also noted that I’m an ardent lover of both these tools. They both are superb in their performance. They excel at fantastic features. I’ve used both these saws in my various projects for many years. It is my opinion that table saw is the best choice for heavy and large wood sheets.
Main Points
- Dwe7491rs has more fence rip capacity than Bosch Miter Saw.
- Dewalt table saw comes with more blade power than the Bosch table saw.
- Bosch excels with soft start motors on the other hand the Dewalt does not.
Specifications | DEWALT DWE7491RS | Bosch 4100 XC-10/ |
Blade Diameter | 10 inch | 10 inch |
Motor Power | 15 Amp | 15 Amp |
Blade RPM | 4,800 | 3,650 |
Table Size | 26-1/4 inch x 22 inch | 30-inch x 22-1/2 inch |
Fence Width Rip Capacity | 32-1/2 inch | 30-inch |
Bevel Capacity | 45 degrees | 47 degrees |
Cut depth – 90 degrees | 3-⅛ inch | 3-⅛ inch |
Cut depth – 45 degrees | 2-¼ inch | 2-¼ inch |
Corded or Battery | Corded | Corded |
Foldable Roll Stand | Yes | Yes |
Price | Less expensive | More expensive |
Main Features Of DEWALT DWE7491RS Vs Bosch 4100 XC-10/ – Comparison
Both tools have similarities and differences, and we’ll discuss them side by side in detail.
Rack And Pinion Fence
The main difference in features of both these tools is the fence. If you just consider the fence, the top priority goes to Dewalt. The supreme feature like the rack and pinion system of Dewalt 10 inch table saw is really superb. I have also tested that the 32-½” rip capacity can easily cut a variety of large shelving and trim materials. The fence keeps consistently parallel to the blade. while Bosch has 30-½” fence rip capacity.
Verdict: Dewalt is the victor!
Blade Vitality
view, the speed range of general woodcutting is approximately 130-170 feet per second. The 4,800 rpm of the Dewalt blade supplies cutting speed just over 200 feet per second, while the Bosch with 3,650 rpm offers 159 feet per second.
During my test, Both these saws allow 10” blades and they can adjust to use with a special insert, but can be purchased separately. Both of these tools come with a 24-tooth ripping blade. Both these tools have the same horsepower engine.
Verdict: Dewalt is the victor!
Bevel Capacity
I have observed that the Dewalt dwe7491rs doesn’t allow the blade to take part beyond 45 degrees. Its bevel capacity ranges from 0-45 degrees only. The Bosch has a bevel capacity 47 degrees. During cutting, extension of a degree or two beyond 45 degrees plays a vital role for the successor of the saw.
Verdict: Bosch is the victor!
Blade Lock
The blade lock is a useful and essential feature for the table saw. For the repetitive cuts when there is need of adjustment settings. According to my attestation, there is much time required for blade stop. A blade lock quickly stops the blade, allowing you to keep your work carry on! The Dewalt does not have this feature as the bosch offers.
Verdict: Bosch is the victor!
Soft Start Motor
How does a soft starter affect an electric motor? A soft starter is a solid-state system or device that is really used to protect an electric motor. I have noticed that in the beginning it extracts 4-7 times the current is used to operate it. While increasing the cutting speed, this substantial current spins up as a result of high torque and indeed wear to the motor. As the soft starter helps in increasing the current in Bosch gradually, the process reduces torque on the motor.
Verdict: Bosch is the victor!
Quick Exchange Riving Knife
The Dewalt portable table saw has a remarkable feature of a quick exchange riving knife. The riving knife is a type of metal shark-fin that lies behind and connects with the blade for new table saws. It is used to hold the blade guard. This knife serves as a shield that stops the cut from closing behind the blade, it is also causing dangerous kickback. The Dewalt takes the step in this model by pulling the handle and lifting the riving knife.
Verdict: Dewalt is victor
Anti-Kickback Pawl
During my experiments, I observed that bosch comes with anti-kickback pawls. These little tools are toothed cam. When they are operated to push the wood in the direction of the cut. As a result, the wood moves back toward the saw operator. It is similar in case of kickback, the cams dig into the surface of the wood, pushing it down onto the table top. So Bosch wins in this way.
Verdict: Bosch is victor
Auxiliary Rip Fence
Both the Bosch and The 10 inch Dewalt table saw are packed with a feature of Auxiliary rip fence. Table saw with stand offers a mechanism of a thinner edge for narrow rip cuts. I have used the full face rip-fence for narrow rip cuts. I have tried to compress the offcut between the moving blade and the fence face, trapping the wood and throwing the offcut back toward me. By this, the smaller fence edge supplies the offcut to drop to one side, it also reduces the tendency to kickback.
Extended Stand
Another remarkable feature is an extendable stand that Bosch exhibits. I probably have used two padester rollers for back support for long sheets. But it is really comfortable that I now have an extendable back support stand for long sheets that passes the blade while cutting in the Bosch 10 inch table saw.
Verdict: Bosch is the victor!
Best For Professionals – Bosch 4100XC-10
The Bosch has two great insertions, the soft starter and the blade are ideal for carpenters or builders on a construction site. Professionals fascinate these two factors a lot. Because a soft starter gives saw longevity and the blade lock provides greater efficiency and safety. So I will recommend Bosch personally.
Final Thought
To sum up, finalizing the debate of DEWALT DWE7491RS Vs Bosch 4100 XC-10/ Comparison. Dewalt and Bosch are both the greatest and super table saws which I have ever used. Two main considerations bring your choice down, the money you want to spend and the use you have for the table saw.
The Dewalt is the best choice for home appliances. It’s a unique brand that fulfills all the requirements to make work easier. It is also available at a reasonable price and provides the same vitality in a smaller frame.
The Bosch 10 inch table saw offers portability with easy blade changes at a great price. I really appreciate its additional back support and fences and so on. No matter what its price is, there is no compromise on quality.
For professionals, I would highly recommend buying the Bosch 10 inch table saw. It is really a super and great brand with super sale support. Its features make your work more quick and fast. A grand tabletop is really a super bonus!
FAQs
Q. How many teeth is best for a table saw blade?
A. The 40-tooth blades are ideal for general woodworking, while 80-tooth blades are required for plywood and vaneers.
Q. How many amps is a good table saw?
A. Most of the saws will extract at least 10 amps for a 120-volt electrical circuit and half as many for 240-volt circuits.