Makita Plunge Circular Saw

Learn and know about the Makita plunge circular saw reviews and how it makes your work so swift!

Can you believe it? Makita plunge circular Saw provides optimum performance with precise cut with splinter-free mirror finish. Yes! I got a chance to visit different track saw models in the market with my team members. After having a keen and critical analysis of different track saws, we are able to present the close survey or pictorial information to the users.

Chop saw offers precise, smooth and straight cuts. This saw is packed with an optional guide rail, anodized aluminum, powerful 12 amp motor and magnesium component. These features are perfect and superb in their performances.

I am deadly sure after reading this article you will be interested to have such a useful tool. My team has focused on the Makita SP6000J Track Saw and showed you the comprehensive details about this tool.

Makita plunge circular saw – Reviews

The Makita brand is unique not only in features but also in performance. As it has become one of the best tools in the market by yielding super results. It has remarkable electronic speed control, outstanding dual front and rear bevel supports and on-board hex wrench and easy blade change. All these features make it unique from other tools.

Tool Box

The tool box of the Makita impact driver is skate-able, which is a spacious case in the plastic form. There is an extra space at the down area of the case for the blades and track clamps. It is the safest place for the accessories, otherwise, these can be purchased separately.
When I unpacked the box, put forth different components in front of myself. I observed that the Makita track saw was perfectly right and there is no need for adjustment in the stop sets. The blade of the saw is of a first-class quality, which is definitely used for the precise long cuts.

Guide Rail

The guide rail consists of top-notch rows of gripping strips on the side ;it is specifically used to keep the rail in place and in touch with the work surface. You have to adjust the rail slides on the saw, when you are going to use the rail for the first time. For balancing a smooth sliding action, I have adjusted its two round knobs until I have found no lateral movement on the rail. There is a need to make a course through a scrap piece in order to align the chip guard with the blade. This makes a perfect alignment of the rail for your cuts.

Initial Cut

After taking the alignment pass, I took action to the initial cut. I set the makita’s track on the ash wood. there is a green button on the side below of the trigger housing, it allows the saw to cut 2 to 3 mm deep. I started to cut the ash wood, after a few seconds I got quite impressive results with the clean, accurate and perfect cut with chip free finish. I was really excited with the wonderful and awe-inspiring results.

Depth Scale

The Makita tool is packed with a depth scale in front of the motor. It showed easy and excellent measurements. It is really interesting that most of the carpentry work is measured on this scale. In order to get clean, smooth and safe cuts, you must set the cut depth. That’s why no more than one blade tooth project can be used under your workpiece. When we use cut depth properly, it minimizes the possibilities for dangerous kickbacks that may cause personal injury.

Dust Extractor

The dust collection of the Makita circular saw is remarkable and outclassed. It leaves little residual sawdust and scant air borne spots. The dust bag accessory of the makita track saw is much better than Festool’s dust extractor.

Rail Clamps

During my projects, I have to use the rail clamps frequently. When there is a need to join the several broken panels. The rail clamps are a really nice feature, handy and a great deal for securing the track.

Blade Speed

The makita’s blade speed is a thumb wheel below the trigger that helps in adjusting the saw speed from 2000 to 6400 RPM. Thick plastic sheet or other complex sheet melt at high RPMs. but the adjustments help in cutting modern materials. The speed of the blade can be changed by adjusting the dial. The 12-amp motor characteristics soft start technology. Which makes the blade speed fantastic that is controlled by electronic speed.

Bevel Capacity

The guide rail is used in cutting simple and accurate angles. adjust the bevel guide in front of the edge of your material, pivot and lock the required angle. Then join it with the guide rail and make your cut. It is really perfect and easy at scales 0-45 degrees left or right.

Pros

Super rip quality
Excellent motor power
Brilliant Saw

Cons

It has only one year warranty

Use In The Project

My team has used the Makita track saw in the project. They used MDF wood and measured it with the scale. Marked with the pencil and started cutting with the help of this tool. As the makita plunge saw is used to cut long panels, they got excellent results with the use of this saw. These long wood panels were pasted on the walls of the shop in the layering shape. In order to shop execution, later then different vinyl stickers were pasted on these panels.

To make it more colorful and inspiring, different splashy lights were lighted on the various spots. that create an awe-inspiring window display.

Conclusion

The Makita Plunge Circular Saw has a significant place among other tools. I have tested it in various carpentry woodworks for breaking down the long panels. The Makita router yields excellent results. It is easier to buy on the budget as compared to its competitors. As I have mentioned, it has lots of advantages and plus points but on the other hand, I have faced a little shortcoming during my experiences.
That is the absence of a riving knife which can lead to kickback. Otherwise, it is one of the best products in the field.

FAQs

Q. Are Makita track saws worth it?
A. Makita is a powerful tool, providing perfect and accurate cuts, handy to use. I have an excellent experience of using it. If you are in search of the best track saw I can recommend you 100%.
Q. How deep will a Makita track saw cut?
A. The Makita track saw can deep cut 2-3/16” at 90 degrees and 1-9/16” at 45 degrees.
Q. Is there a dust bag for the Makita plunge saw?
A. The Makita plunge saw has a well designed dust bag to hold a significant amount of dust. The dust bag has the capability to empty the bag quickly.

Makita Plunge Circular Saw – Reviews 2023